Why Does the Motorcycle Engine Stop While Riding?

We all hate when our motorcycle doesn’t work as it was made for. Even sometimes, your motorcycle engine stops while riding. Have you ever wondered why does the motorcycle engine stop while riding? 

Motorcycle engine stops while riding can be caused by numerous reasons such as the battery, fuel, and clogged exhaust. 

So how can you solve these problems to rerun your motorcycle? No worries! In this post, we’ve discussed all primary reasons explaining the reasons why your motorcycle engine stops while riding and how to solve these problems.

Why Does the Motorcycle Engine Stop While Riding?

As mentioned above, there could be numerous reasons why your motorcycle engine stops while riding. And here are some top reasons why your motorcycle engine stops while riding.

Why Does the Motorcycle Engine Stop While Riding: Faulty motorcycle battery. Faulty carburetor.
Low fuel. 
Fuel filter. 
Low oil. 
Exhaust. 
Ignition switch. 
Spark plug. 

Faulty Motorcycle Battery: 

Although the motorcycle battery doesn’t turn off the motorcycle engine while riding, still you can’t even start the motorcycle without a good battery. 

There could be many reasons why your motorcycle battery isn’t working fine. Still standing on the motorcycle for a year, using the tap water, or installing a heavy electrical device on your motorbike could be some of the main reasons. 

Faulty Carburetor: 

Before understanding this cause, you must understand the role of the carburetor. The carburetor is a device that facilitates the continuous supply of air to be mixed with fuel. 

The problem called less fuel to air ratio is caused when your motorcycle has a clogged carburetor. The clogged carburetor doesn’t allow the fuel and neither the air to pass through the carburetor. 

Although there are many reasons behind the clogged carburetor and using bad quality fuel, and defective air filters are the most predominant ones. 

Low Fuel: 

Low fuel is the most predominant reason why your motorcycle engine stops while riding. In many cases, riders face problems starting their motorcycle if their carburetor is working lean. 

The high amount of air in the comparison of fuel also causes the motorbike not to start, even if there is plenty of fuel in your motorcycle tank.

Fuel Filter: 

Clogged fuel filters can also be the reason why your motorcycle stops working in the mid-journey. It is caused when you use low-quality fuel, which prevents the circulating of fuel throughout the engine. 

If you ever experience this problem, then we highly recommend checking your motorcycle with your mechanic. The mechanic will remove the tank after emptying it and will clean the motorcycle filter. 

Low Oil:

Oiling the motorcycle is necessary, but it’s the most ignorant activity by riders. 

When running a motorcycle, there’s a movement of piston and cylinder, and it causes friction. This friction produces heat that not only overheats your motorbike but also stops your motorcycle. 

Low oil causes the fusion of piston and engine, which seriously hamper the motorcycle health and stop the motorcycle back tire anytime. And believe us, ignoring the regular oiling of your motorbike may cause severe accidents. 

Thus we highly recommend checking the motorcycle oil in every four weeks or every 4000 miles. 

Exhaust: 

Although the blocked exhaust is a rare problem, we still can’t afford to ignore this point. 

Generally, poor fuel quality causes the exhaust blocking problem. It’s caused when impurities present in the fuel combine with air coming out from the exhaust. 

The blocked exhaust caused less air density in the fuel, which stopped the motorcycle suddenly. We highly recommend using high-quality fuel and cleaning the exhaust every six months. And please don’t forget to clean the pipes attaching the exhaust too.

You’ll find greasy and smelly material called the blocking agent, which blocks the air pathway.  

Ignition Switch: 

Just like a blocked exhaust, the ignition switch could be the main reason why your motorcycle stops while riding. 

An ignition switch is necessary to keep the motorbike working, but if your ignition switch isn’t working, you can apply the methods mentioned below. 

To see whether your ignition switch is faulty or not, you need to bring the motorcycle to neutral gear and observe the N green light. In the ideal condition, you’ll observe the green light as the indicator of N gear. 

Spark Plug: 

Spark plugs consist of electrodes that produce the ignition and lead to the combustion of fuel in the presence of air in the engine. 

Although a spark plug is not the reason why your motorcycle engine stops while riding, still without the spark plug, you can’t even start the engine. The spark plug should be clean and shouldn’t contain any impurities or dust.

 

How to Prevent Your Motorbikes from Above Problems?

1. Faulty Battery:If you ever find a problem with the motorbike battery then we highly recommend reviving your motorcycle battery in your home.
2. Low Fuel:For modern motorcycles a rider can see the low fuel indicator on the dashboard. 3. Fuel Filter: You can remove the fuel filter from the motorcycle tank and blow the air through them. If the air can pass through them easily then there’s no need to buy new fuel filters. 
4. Ignition Problem:For this purpose you probably need the mechanic who will replace the ignition switch with a working switch. 
5. Spark Plug:If your spark plug doesn’t work then we’d recommend buying a new spark plug which will surely be cheaper than any motorcycle part. 
6. Low Oil:We highly recommend carrying a bottle of motorcycle oil engine if you’re going for a long ride. 
7. Exhaust: You need to prepare the mixture of caustic soda+any reagent and dish soap and put it down in the faulty exhaust. 
8. Carburetor:You can prevent your motorcycle from clogging the carburetor by simply cleaning the carburetor.

On the above, we mentioned some problems which caused motorbike stops while riding. Now it’s prime time to discuss the solution to rerun your motorcycle. 

Faulty Battery: 

If you ever find a problem with the motorbike battery, then we highly recommend reviving your motorcycle battery in your home. Generally, the sulfur ion electrolyte causes the formation of a sulfur layer on the lead plate. 

We highly recommend changing the electrolyte after draining the sulfur electrolyte. 

Low Fuel: 

As mentioned above, low fuel is one of the main reasons why motorcycles stop while riding. For modern motorbikes, there’s an indicator that indicates low fuel. 

And for old-style motorbikes, the rider can use an odometer before dripping it zero figure and notice closely until you reach your destination. 

Please remember, after reaching the fuel level zero; you can’t even start your motorcycle. So it’s better to ensure you’ve enough fuel for your destination. 

Fuel Filter: 

Unfortunately, you can’t make your faulty fuel filter working again. You can remove the fuel filter from the motorcycle tank and blow the air through them. 

If the air can pass through them easily, there’s no need to buy new fuel filters. 

Ignition Problem: 

You can’t fix the ignition switch problem. And for this purpose, you probably need the mechanic who will replace the ignition switch with a working switch. 

Spark Plug: 

Generally, dust causes the faulty spark plug, which you can prevent easily. You need to remove the spark plug from the engine and clean the dust through the air. 

But still if your spark plug doesn’t work, then we’d recommend buying a new spark plug which will surely be cheaper than any motorcycle part. 

Low Oil: 

As mentioned above, the lack of oil causes friction between the piston and cylinder, which causes the release of an enormous amount of heat. 

In practical life, you can’t prevent this situation. All you can do is to oil the motorcycle engine. We highly recommend carrying a bottle of motorcycle oil engine if you’re going for a long ride. 

And please ensure your motorcycle engine has enough oil to run the motorcycle engine smoothly. 

Exhaust: 

Although you may need a mechanic to sort out the exhaust problem. But if you think you can do the mechanic work by yourself, you need to prepare the mixture of caustic soda + any reagent and dish soap.

Insert the mixture in the faulty exhaust for more than an hour or two. This mixture will help you to eliminate any carbon deposits remaining in the exhaust. 

Faulty Carburetor: 

As mentioned above, the faulty carburetor disturbs the air and fuel ration and creates fuel combustion. 

You can prevent your motorcycle from clogging the carburetor by simply cleaning the carburetor. And you can do it by replacing and without replacing the carburetor from the motorbike. 

With the jet stream water, all clogged residue will be cleaned, and don’t forget to use jet air to remove any dry residue. 

Frequently Asked Question:

Why does the motorcycle engine stop while riding? 

Motorcycle engine stops while riding can be caused by numerous reasons such as the battery, fuel, and clogged exhaust. 
And here are some top reasons why your motorcycle engine stops while riding.
1. Faulty motorcycle battery. 
2. Faulty carburetor.
3. Low fuel.
4. Exhaust.  

How faulty carburetor can be the problem?

Before understanding this cause, you must understand the role of the carburetor. The carburetor is a device that facilitates the continuous supply of air to be mixed with fuel. 
The problem called less fuel to air ratio is caused when your motorcycle has a clogged carburetor. The clogged carburetor doesn’t allow the fuel and neither the air to pass through the carburetor. 

How spark plug can be the problem?

Although a spark plug is not the reason why your motorcycle engine stops while riding, still without the spark plug, you can’t even start the engine. The spark plug should be clean and shouldn’t contain any impurities or dust.

Final Verdict:

Why does the motorcycle engine stop while riding? Motorcycle engine stops while riding can be caused by numerous reasons such as the battery, fuel, and clogged exhaust. 

On the above, we mentioned problems such as blocked motorcycle exhaust, low fuel, and low oil and the solutions which can make your motorcycle rerun.